Building Your Own Outboard Motor Stand: A Fun And Easy Project

Arwen's meanderings Building an outboard engine maintenance stand from arwensmeanderings.blogspot.com

Introduction

Are you tired of having to lay your outboard motor on the ground every time you need to work on it? Or maybe you just need a dedicated storage spot for your motor when it's not in use. Whatever the reason, building your own outboard motor stand is a fun and easy project that can be completed in just a few hours. In this article, we'll provide you with all the information you need to build your own stand, along with some helpful tips and product recommendations.

Materials and Tools

Here's a list of the materials and tools you'll need to complete this project:

Materials	Price
4x4 lumber (8ft)	$10-$15
2x4 lumber (8ft)	$5-$10
3-inch wood screws	$5-$10
4 casters	$15-$20
Wood glue	$5-$10
Power drill	$30-$50
Drill bits (1/8", 3/16")	$5-$10
Saw (circular or hand)	$20-$50
Measuring tape	$5-$10

Step-by-Step Guide

Now that you have everything you need, it's time to start building your stand. Follow these steps:

Step 1: Cut the lumber

Using your saw, cut the 4x4 lumber into four pieces that are each 24 inches long. Cut the 2x4 lumber into eight pieces that are each 18 inches long.

Step 2: Assemble the base

Lay two of the 4x4 pieces parallel to each other, about 18 inches apart. Place one of the 18 inch 2x4 pieces between the two 4x4s at each end, so that they form a rectangle. Screw the 2x4s into the 4x4s using the wood screws. Repeat this process with the remaining 4x4 and 2x4 pieces to create a second rectangle.

Step 3: Connect the two rectangles

Place the two rectangles parallel to each other, about 24 inches apart. Connect them by screwing two of the 18 inch 2x4s across the top of both rectangles, one at each end.

Step 4: Add the crossbars

Using the remaining 2x4s, create four crossbars by screwing two 18 inch pieces together at a 90 degree angle. Place these crossbars evenly spaced between the two rectangles and screw them into place.

Step 5: Add the casters

Screw one caster into each corner of the base, making sure they are evenly spaced and level.

Step 6: Finish it off

Apply wood glue to all the joints to give them extra strength. Let the glue dry overnight before using the stand.

Product Recommendations

While you can use any type of lumber and casters for this project, we have a few product recommendations that we think work particularly well:

Product	Price	Why We Like It
Pressure-treated 4x4 lumber	$12	Resistant to rot and insects
Locking casters	$17	Prevent the stand from rolling around
Wood glue	$8	Dries clear and is water-resistant

Conclusion

Building your own outboard motor stand is a great way to save money and have a dedicated spot for your motor. With just a few hours of work and some basic materials, you can create a sturdy and reliable stand that will last for years. We hope this article has been helpful and that you're ready to get started on your own project!